Fios Router | Verizon Internet Support (2024)

Table of Contents
1. My Wi-Fi is on, why doesn’t my device see the Wi-Fi network (SSID’s) 2. Do my Wi-Fi drivers on Windows need to be updated to see for Wi-Fi 6 (802.11ax) networks)? 3. What do the Unified Button LED light colors represent? 4. Where can I find my Wi-Fi Name/Password or Admin Name/Password 5. Does the Fios Router support Self Organizing Network (SON)? 6. How do I connect a Wi-Fi device to the Fios Router? 7. How do I set up Guest Wi-Fi on the Fios Router? 8. Where can I find the Wi-Fi name and password for the Fios Router? 9. How do I connect the Fios Router via WPS (Wi-Fi protected setup)? 10. How and where can I manage the Fios Router? 11. How do I set parental controls on the Fios Router? 12. How do I connect a device to an Ethernet port on the Fios Router? 13. How do I manage the Fios Router advanced settings? 14. How do I test my internet speed? 15. Is the Fios Router encrypted? 16. How can I reboot the Fios Router? 17. How can I reset the Fios Router to its factory default settings? 18. Does the router support Tri-Band Wi-Fi? 19. What is IoT Wi-Fi?

  • Some devices may need their Wi-Fi drivers updated to support routers which use Wi-Fi 6 (802.11ax).Also, some devices, like TV's and laptops, may not support the latest Wi-Fi technology used by anadvanced router, and may need to be disabled.

    Note: Intel Wireless adapters supporting 802.11ac with older drivers might not show Wi-Fi 6(802.11ax) networks.Pleaseverify/update to the latest Wi-Fi drivers.

  • Yes, Wi-Fi divers should always be updated for optimal Wi-Fi performance. In many cases, but not all,Wi-Fi drivers are automatically updated with auto updates enabled

    Note: Intel Wireless adapters supporting 802.11ac with older drivers might not show Wi-Fi 6(802.11ax) networks.Pleaseverify/update to the latest Wi-Fi drivers.

  • Fios Router | Verizon Internet Support (1)

  • Wi-Fi name/password or Admin name/password can be found on the rear label of your Fios Router.

    Fios Router | Verizon Internet Support (2)

  • Yes, SON is supported by default and can be managed within My Verizon, or locally on the router. Visitverizon.com/sonsupportfor more information.

  • Access the Wi-Fi setting on your Wi-Fi device, then select your Fios Router using the Wi-Fi nameor Wi-FI network name (ESSID) shown on the label located on the back panel of your router. Enter theWi-Fi password or Wi-FI password (WPA2 key). The default password/key is also shown on the label.

    Note: Verizon recommends that you establish a strong, unique password for your Wi-Fi. Learn how tochange your Wi-Fi Password below.

  • Sign intoMy Verizonto set up your Guest Wi-fi. To access:

    • hover overServices, selectInternet >underMy Networksselect yourGuest Network >selectEnable Guest Wi-Fi Access

    Don’t have an account?

    Register now

  • Wi-Fi name and password can be found in My Verizon or on a label on your Fios Router

    Sign intoMy Verizonto view your Wi-Fi name and password. To access:

    • hover overServices, selectInternet >underMy Networkthepasswordis listed below eachnetwork name

    Don’t have an account?

    Register now

    The Wi-Fi password is shown on the label located on the side of your Fios Router (G1100).

    Please refer to the diagram below:

    Fios Router | Verizon Internet Support (3)

  • Your Fios Router comes with a WPS button that allows for a connection to your Wi-Fi network without manually entering a password. If your wireless device supports WPS, follow your device manufacturer user’s guide to set up and connect to your network. VisitMy Verizonto manage Wi-Fi settings.

  • Sign intoMy Verizonto manage your settings. To access

    • hover overServices, selectInternet

    Don’t have an account?

    Register now

    You can also manage advanced settings from the Fios Router interface via your browser.

  • You can block or set schedules for Wi-Fi access using My Verizon or the router interface.

    Sign intoMy Verizonto manage your settings. To access:

    • Hover overServices, selectInternet> underManage My DevicesselectDevices & Parental Controls

    Don’t have an account?

    Register now

  • Plug one end of an Ethernet cable into one of the four yellow Ethernet ports on the back of your router.

    Plug the other end of the Ethernet cable into the Ethernet port of your network device.

  • Open your browser and enter "myfiosgateway.com" or "192.168.1.1" into the browser. You will betaken to a page to enter your username and administrator password:

    • The default username is "admin"
    • The unique default password is on the label located on the back of the router. Please refer to thediagram below

    Fios Router | Verizon Internet Support (4)

  • Test the speed of your router and devices with theVerizon Speed Testtool:

    • Learn ways to optimize your connection.
    • Measure your network's upload and download speeds.

  • Yes, each Fios Routeris preset at the factory to use WPA2 (Wi-Fi Protected Access) encryption for your wireless network. WPA2 is the strongest setting for most users and provides maximum security but may prevent older devices from connecting.

    Sets a strong, unique password for your router. VisitMy Verizonto change your default password.

  • Press and hold the Unified button on the front of the router for 10 seconds. Give the router some timeto connect to the Internet and wait until the Internet light becomes steady white.

  • Pressing and holding the red reset button located on the back of the Fios Router will restore the router to the factory default settings shown on the label located on the side of your router. Use the pointed end of a paperclip to press and hold the reset button for 15 seconds.

    Important Note: If you have customized your network name and/or password, resetting your Fios Router to the factory defaults not only changes your router username and password back to the factory default values, but it also deletes all of your home network settings. This includes the ESSID and network encryption key that you created. After you reset your factory defaults, your home network won't be accessible until you reconfigure your gateway and update all your network devices to use the same customized ESSID and network encryption key (WPA2).

  • Yes, the router supports Tri-Band Wi-Fi, including one 2.4 GHz, & 2 separate 5Ghz Wi-Fi bands. The third band is not exclusively for extenders, but is also available by default, to connect personal devices to, when no extenders are connected over Wi-Fi.

  • IoT Wi-Fi is a new Wi-Fi option available to you through a separate Wi-Fi name and password. IoT Wi-Fi broadcasts only on the 2.4 GHz band to improve the setup flow of IoT devices which only use 2.4 GHz. Devices connected to this Wi-Fi are accessible to other devices on the Primary Wi-Fi.

Fios Router | Verizon Internet Support (2024)
Top Articles
Ramped Up Ramen Recipe
Is Ghee Vegan? And Where Does It Come From? | PETA
Joe Beamer
Plumpmiya
What Is A Good Hmh Score For 11Th Grade
Alles zum MMORPG ArcheAge 2: Release, Gameplay und Klassen
James Logan And Leah Williams
Baddies East Brokensilenze
Japanese Big Natural Boobs
Sf Craigslist Cars For Sale By Owner
Loot Stash Dst
Diving Split Face Original Video
Latest Posts
Guided Moose Hunts in Maine
What were the different parts of a castle? :: Castles-web
Article information

Author: Moshe Kshlerin

Last Updated:

Views: 5446

Rating: 4.7 / 5 (77 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Moshe Kshlerin

Birthday: 1994-01-25

Address: Suite 609 315 Lupita Unions, Ronnieburgh, MI 62697

Phone: +2424755286529

Job: District Education Designer

Hobby: Yoga, Gunsmithing, Singing, 3D printing, Nordic skating, Soapmaking, Juggling

Introduction: My name is Moshe Kshlerin, I am a gleaming, attractive, outstanding, pleasant, delightful, outstanding, famous person who loves writing and wants to share my knowledge and understanding with you.