Finally: A Liquid Measurement Conversion Chart for Any Recipe (2024)

Our liquid measurement conversion chart can make it easy to convert recipes for a layer cake, chocolate chip cookies, a just-thick-enough sauce, and almost anything else. It can be especially tricky to figure out exactly how much liquid you need when halving or doubling recipes. There's a difference between dry and liquid measuring cups, too.

Here, you can learn about the proper tools to get you started. Once you have what you need, our guide to liquid measurement conversion will do most of the math for you. It will help you convert liquid metric measurements to the imperial system used in the United States, plus share crucial measurement math, like how many tablespoons are in a cup.

Finally: A Liquid Measurement Conversion Chart for Any Recipe (1)

Best Tools for Liquid Measurements

To measure liquids, you'll need a set of liquid measuring cups, like KitchenAid's 3-piece Measuring Cup Set ($23, Wayfair). You'll also need a set of measuring spoons, like this stainless steel set ($17, Crate & Barrel). Measuring cups are made of clear glass or plastic and hold 1, 2, 4, or 8 cups of liquid. They have incremental markings on the outside with a handle and spout for easy pouring.

Don't use dry measuring cups to measure liquid (or vice versa) because you can get inaccurate measurements. Nested measuring spoons commonly come in sets that measure ¼ teaspoon, ½ teaspoon, 1 teaspoon, and 1 tablespoon. Unlike measuring cups, they can be used for dry and liquid ingredients.

Liquid Measurement Conversion from Metric to U.S. Measurements

If you're making a recipe that uses metric measurements, you'll probably have to convert the measurements before you get cooking. (If your measuring tools have both metric and standard volumes marked, the metric conversions might not be an issue.) This liquid measurement conversion chart will help you figure out the correct liquid measurement conversion.

  • 0.5 ml = ⅛ teaspoon
  • 1 ml = ¼ teaspoon
  • 2 ml = 1/3 teaspoon
  • 5 ml = 1 teaspoon
  • 15 ml = 1 tablespoon
  • 25 ml = 1 tablespoon + 2 teaspoons
  • 50 ml = 2 fluid ounces = ¼ cup
  • 75 ml = 3 fluid ounces = ⅓ cup
  • 125 ml = 4 fluid ounces = ½ cup
  • 150 ml = 5 fluid ounces = ​⅔ cup
  • 175 ml = 6 fluid ounces = ¾ cup
  • 250 ml = 8 fluid ounces = 1 cup
  • 500 ml = 1 pint = 2 cups
  • 1 liter = 1 quart = 2 pints = 4 cups

Liquid Measurement Conversion Math

Knowing how to convert measurements within the standard system can make your time in the kitchen easier if you're halving or doubling a recipe (or if one of your cups is in the dishwasher). When you're wondering how many tablespoons are in ¼ cup or how many ounces make up a pint, refer to this liquid measurement conversion chart.

A-Z Guide to Cooking Terms and Definitions

Tablespoon Math

Tablespoons and teaspoons can be a little tricky, but keeping these conversions handy will help whenever you're making changes to a recipe, whether for a larger crowd or a smaller group. For example, instead of eyeballing half of ¾ cup, measure what you need in tablespoons instead (6 Tbsp. in the case of halving ¾ cup).

  • 3 teaspoons = 1 tablespoon
  • 4 tablespoons = ¼ cup
  • 5 tablespoons + 1 teaspoon = ⅓ cup
  • 8 tablespoons = ½ cup
  • 10 tablespoons + 2 teaspoons = ⅔ cup
  • 12 tablespoons = ¾ cup
  • 16 tablespoons = 1 cup

More Liquid Conversions

To make any recipe doable no matter the supplies you have on hand, here are a few more common liquid conversions to help you out:

  • 1 tablespoon = ½ fluid ounce
  • 1 cup = ½ pint= 8 fluid ounces
  • 2 cups = 1 pint = 16 fluid ounces
  • 4 cups = 2 pints = 1 quart = 32 fluid ounces
  • 16 cups = 8 pints = 1 gallon = 128 fluid ounces

Finally: A Liquid Measurement Conversion Chart for Any Recipe (2)

How to Measure Correctly

To measure liquids correctly, pour into a liquid measuring cup set on a level surface. To confirm the measurement's accuracy, bend down so your eyes are level with the markings on the side of the cup. Don't try to eyeball it from above, either; looking down on your measuring cup can look like you have too much, but you might be right on the mark from eye level.

Especially when baking, too much or too little liquid can affect how your recipe turns out, so it's essential to be as precise as possible. Smaller measurements are the exception: When measuring 1 tablespoon or less, fill the appropriate-size measuring spoon to the rim without letting the liquid spill over.

How Many Grams Are in One Stick of Butter?

Keep these liquid measurement conversion charts handy. Once you have them, you'll use them all the time. Memorizing a few can be helpful (like remembering 3 teaspoons = 1 tablespoon), but it never hurts to double-check how to convert measurements for the best recipe results. With this liquid measurement conversion chart, you'll have no problem conquering savory dinner recipes, homemade desserts, and more.

Kitchen Tools Every Home Cook Needs

  • 4 Reasons a Food Scale Belongs in Every Kitchen (And How to Use One)
  • I'm a Food Editor and I Swear By This Kitchen Tool (In Fact, I Have 3)
  • The 10 Best Kitchen Knife Sets for Home Cooks of All Skill Levels
  • The 7 Best Baking Sheets, According to Testing
  • What is a Dutch Oven—and How Do You Use It?

Frequently Asked Questions

  • What units of measure do you use for liquids?

    Liquids are measured in cups, pints, quarts, and gallons. For smaller quantities, measure liquids in teaspoons or tablespoons. Liquids can also be measured in ounces.

  • Can you measure ounces without a scale?

    You don't have to use a scale to measure fluid ounces. Instead, you can measure fluid ounces with a measuring cup. A one-cup measuring cup holds 8 fluid ounces, so 1 ounce would be 1/8 of a cup.

  • What's the difference between ounces and fluid ounces?

    The difference between fluid ounces and ounces is what they measure. Fluid ounces measure the volume of liquids like water or milk, and ounces measure the weight of a solid ingredient, such as sugar.

Finally: A Liquid Measurement Conversion Chart for Any Recipe (2024)

FAQs

Finally: A Liquid Measurement Conversion Chart for Any Recipe? ›

Place the measuring cup flat on the countertop or table. So the liquid inside will be level and you will get an accurate measurement. When reading the measurement, keep your face at eye level with the cup. Looking at it from above will cause you to get an incorrect measurement.

What are the liquid measurements in order? ›

Liquid Measurement Conversions
  • 1 fluid ounce = 2 tablespoons.
  • 1 cup = 8 fluid ounces.
  • 1 pint = 2 cups or 16 fluid ounces.
  • 1 quart = 2 pints or 32 fluid ounces.
  • 1 gallon = 4 quarts or 128 fluid ounces.

How do you measure liquid ingredients? ›

Place the measuring cup flat on the countertop or table. So the liquid inside will be level and you will get an accurate measurement. When reading the measurement, keep your face at eye level with the cup. Looking at it from above will cause you to get an incorrect measurement.

What is the conversion of a liquid measuring cup to a dry measuring cup? ›

But what they really mean is 1 cup of liquid = 8 fluid ounces. For dry measurements, the rules change. Because dry ingredients vary greatly in weight, you can't rely on the same conversion. For example: 1 cup of all-purpose flour weighs 4.5 ounces, not 8 ounces.

What are the example of liquid measurements? ›

Common Metric and US Metric Conversion for Measuring Liquids
UnitEquivalent
1 Fluid Ounce29.57 millilitres
1 Cup236.588 millilitres
1 Quart946.353 millilitres
1 Millilitre0.034 Fluid Ounces
1 more row

What are the units of measurement for the volume of a liquid? ›

Liquid volume is the amount of liquid in a container. You can measure liquid volume using metric units such as milliliter (mL) and liter (L). A dropper holds about 1 milliliter. A water bottle holds about 1 liter.

How do you measure liquids in a liquid measuring cup? ›

When measuring liquid ingredients, pour until the meniscus (i.e. the lowest point of the liquid's surface) reaches the desired measurement line. It's best to check your measurement at eye-level.

What is the easiest way to convert measurements? ›

Use the basic conversion rule to solve any problem: from a larger unit to a smaller unit, multiply. From a smaller unit to a larger unit, divide. It's really that simple!

How can I measure liquid without a measuring cup? ›

Measure with tablespoons or teaspoons instead. 16 tablespoons equal 1 cup, and 48 teaspoons equal 1 cup. Alternatively, use a kitchen scale. 1 cup of liquid equals 240 grams on a scale.

How do you measure a liquid measurement? ›

How to Measure Correctly. To measure liquids correctly, pour into a liquid measuring cup set on a level surface. To confirm the measurement's accuracy, bend down so your eyes are level with the markings on the side of the cup.

How do you read liquid measurements? ›

Place the graduated cylinder on a flat surface and view the height of the liquid in the cylinder with your eyes directly level with the liquid. The liquid will tend to curve downward. This curve is called the meniscus. Always read the measurement at the bottom of the meniscus.

How do you measure liquid in baking? ›

LIQUIDS. Liquids used in baking such as milk, water, oil, etc should be measured at eye level. Using a liquid measuring cup, pour the liquid into the cup. Then, bend down to make sure the liquid is EXACTLY at level with the measuring requirement of the recipe.

Is 1 cup dry the same as 1 cup liquid? ›

Liquid measuring cups and dry measuring cups have one big thing in common: They hold the same volume. A 1-cup liquid measuring cup and a 1-cup dry measuring cup, for example, both equal 16 tablespoons.

Is there a difference between a liquid measuring cup and a dry one? ›

Liquid needs to be measured by the bottom of its meniscus (the curve that forms on the top of liquid). But the meniscus can't be properly measured in a dry measure, since you must fill the dry measure right to the top with the liquid. The bottom of the meniscus is thus concealed.

Is 8 oz dry the same as 8 oz liquid? ›

While liquid and dry measuring cups do hold the same volume, the difference is that each is specially designed to do a better job of measuring its respective ingredients.

What are the 5 types of units used for measuring liquids? ›

Cups, pints, quarts, and gallons are customary units of measurement. Two metric units of capacity are milliliters and liters. A milliliter is equal to about 20 drops from an eyedropper.

What are the 10 units of measurement? ›

The base SI units of measurement list is the second (time), meter (length), kilogram (mass), ampere (electric current), kelvin (temperature), mole (amount of substance), and candela (luminous intensity). Metric units of length include the kilometer, hectometer, dekameter, meter, decimeter, centimeter, and millimeter.

What are the 3 standard sizes for liquid measuring cups? ›

Liquid measuring cup sets come with the following sizes: 1 cup, 2 cups, 4 cups and 8 cups. This variety will allow you to finish tasks with more accuracy. In addition to a breakdown of cup portion (1/8, 1/4, 1/3, 1/2), these vessels should display markings denoting ounces and milliliters.

Top Articles
Latest Posts
Article information

Author: Domingo Moore

Last Updated:

Views: 6008

Rating: 4.2 / 5 (53 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Domingo Moore

Birthday: 1997-05-20

Address: 6485 Kohler Route, Antonioton, VT 77375-0299

Phone: +3213869077934

Job: Sales Analyst

Hobby: Kayaking, Roller skating, Cabaret, Rugby, Homebrewing, Creative writing, amateur radio

Introduction: My name is Domingo Moore, I am a attractive, gorgeous, funny, jolly, spotless, nice, fantastic person who loves writing and wants to share my knowledge and understanding with you.